WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
Description
1.8.2 Equipment
Travel Arrangement
Depending on the model (4-wheel or rear-wheel drive) the machine is equipped with a
3.1 or 7.9 CC hydraulic pump complete with pressure regulators to supply either the 4
or 2 hydraulic motors controlling the gasoline engine via drive belt transmission system.
Important
Pressure regulators are control valves and are factory set by the manufacturer to the
ideal flow capacity. The gasoline engine is factory set by the manufacturer to the max
admissible rev. number. Unauthorized alteration of manufactuers‘ settings are subject to
warranty loss.
Tires and Tires Inflation Pressure
Recommended tires:
Turf tread tires
Inflation pressure
16 x 6,5 – 8 “
front
0,8 bar
20 x 10,0 – 8“
rear
0,7 bar
Turf tread tires
Inflation pressure
16 x 6,5 – 8 “
front
1,8 bar
20 x 10,0 – 8“
rear
1,5 bar
Operating and Parking Brake
The mower is equipped with one hydraulic and two mechanical brakes respectively for
travel/operating and parking use. (see paragraph 1.3 of this manual / Engaging and
realising parking brake)
CAUTION
Immediately contact the closest authorized service center in the event of reduced
brakes efficacy.
Easy-lift Mower Deck Adjustment
The mower is equipped with mechanical deck lifter (lever) located on the dashboard
on the right hand side of the operator‘s seat (more details under paragraph 1.3 of these
instructions Engaging mower deck / mowing).
Fuel Supply
A fuel tank with filler cap is located under the engine hood on the left hand side of the
engine. (see Fig. 1.8.2.1)
Oil Tank
A special oil tank is built in the mower frame for a total oil capacity of 11.5 l.
The filler cap is located right under the operator‘s seat and can be easily identified
by its red-orange plastic cap.
(see Fig. 1.8.2.2)
IMPORTANT
In compliance with applicable environmental rules the mowers comes with a first fill of a
synthetic HVI Bio-hydraulic oil (HEES Ester-based, high-temperature, multipurpose, quik-
kly biodegradable) with viscosity SAE 5W - 20.
Strictly refuel with same or equivelent oil kinds.
Fig. 1.8.2.1
Fig. 1.8.2.2
WMV-Dresden, Ersatzteilservice für Elektrowerkzeuge, Motor- und Gartengeräte