WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
WMV-Dresden
Assembling Grass Catcher
Rear mounting angles (20 - 21) are already provided by the manufacturer on each side
of the mower as it comes shipped.
Mount the right-hand catcher bracket (18) on the left-hand angle (20) and secure it with
hex screws (22) and washers (23) -
BEWARE: drop the screws through the holes from
the inside so that the thread is left standing out.
(See picture 1.2.4 for parts number
and 1.2.5 for final asset view).
Mount the left-hand catcher bracket (19) on the right-hand angle (21) and secure it with
hex screws (22) and washers (23) -
BEWARE: drop the screws through the holes from
the inside so that the thread is left standing out.
(See Fig. 1.2.4 for parts number and
1.2.5 for final asset view).
Lift the grass catcher assembly holding it on the special carrying handle and hang it up
on the special brackets. (see Fig. 1.2.6)
ATTENTION
Perform final adjustment of the chute deflector (10 on Fig. 1.2.4) during lawn mowing
using the special adjustment screw.
Deflector DOWN to trimm short grass
Deflector UP to cut long grass
Assembly and Setup
Fig. 1.2.5
Fig. 1.2.6
WMV-Dresden, Ersatzteilservice für Elektrowerkzeuge, Motor- und Gartengeräte