Fa-Ga SAMURAI B 180 Скачать руководство пользователя | Manualshive

Страница: 24 / 45

background image

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

WMV-Dresden

Maintenance

Changing a Flat Tire

STOP the mower on a hard, preferably ﬂat surface (it is unsafe to jack up a vehicle on
an incline), STOP the engine and APPLY parking brakes.
Use blocks or wedges to block the other tires from rolling in either direction. Take a
suitable tires changer and locate a safe lift point along the frame of the mower. Position
the jack under it on the side of your ﬂat tire. Keep lifting the mower till the ﬂat tire is off
the ground while leaving room to mount the new one in.

IMPORTANT

Make sure that the ground surface is hard enough to avoid jack sinking down while
lifting and provide for a large stable jack base.

Changing Front Tires on a Rear-Wheel Drive Model

(Fig. 1.9.2.6)

Remove cover.
Release and remove spindle locknut (1) using a Philips head screw-driver, remove
shim (2) and cautiously pull the tire off the axle pivot making sure that the rear shim
remains in place on the wheel spindle.
Before mounting the new tire, lubricate the area around axle pivot using a waterproof
grease. Put shim, tire, shim and spindle locknut back in place using top care.
At last ﬁt cover back into place.

Changing Front Tires on 4-Wheel Drive Models

(Fig. 1.9.2.7)

Remove cover.
Release and remove capscrew.
Use a special removing bolt (not included in mower price) to pull the tire off the axle
pivot assuring yourself that the adjusting washer remains on the axle pivot.
Before installing the new tire lubricate the axle spindle area using waterproof grease.
Carefully hammer the new wheel in place on the axle pivot using a soft plastic hammer.
Drop the capscrew in by hand and tighten it by means of a torque wrench (440 Nm ).
At last ﬁt cover back into place.

Changing Rear Tires on 4-Wheel and Rear-wheel Drive Models

(Fig. 1.9.2.8)

Remove cover.
Release and remove all 4 lug nuts.
Pull tire off axle pivot. Before installing the new tire lubricate the axle spindle area
using waterproof grease. Carefully install new tire on axle-pivot.
Drop the lug nuts in by hand and tighten by means of a torque wrench (440 Nm ).
At last ﬁt cover back into place.

WARNING

Retighten wheels hardware (bolts, screws and nuts) after the ﬁrst 6-8 operation hours.

Tensioning Rear Wheel Drive Chain

Remove discharge chute. Release chain retain nut (SW 32) and stretch the chain using
chain tensioner. Tighten retain nut and ﬁt the discharge chute back into place.

Fig. 1.9.2.6

Fig. 1.9.2.7

Fig. 1.9.2.8

WMV-Dresden, Ersatzteilservice für Elektrowerkzeuge, Motor- und Gartengeräte

«
...
22
23
24
25
26
...
»

Содержание SAMURAI B 180














































Отзывы:

Нет отзывов

Похожие инструкции для SAMURAI B 180

Бренд: McConnel Страницы: 108

Бренд: Poulan Pro Страницы: 8

Бренд: Poulan Pro Страницы: 48

Бренд: Matrix Страницы: 68

Бренд: Gardenline Страницы: 17

Бренд: VonHaus Страницы: 12

Бренд: Garland Страницы: 172

Бренд: Gardena Страницы: 290

Бренд: Ozito Страницы: 14

Бренд: Gartenmeister Страницы: 52

Бренд: Jonsered Страницы: 120

CRAFTSMAN 944.604931

Бренд: Sears Страницы: 56

Craftsman 917.254920

Бренд: Sears Страницы: 29

Бренд: Sears Страницы: 28

Бренд: Sears Страницы: 56

Бренд: Mountfield Страницы: 20

Бренд: Mountfield Страницы: 14

Бренд: Ikra Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды