F5 i10000 Series, Руководство по платформе

Страница: 23 / 72

Letter Option Description
• 9600
• 19200 (default)
• 38400
• 57600
• 115200
I Display platform
information Displays information about the AOM firmware, bootloader, and
management network configuration; chassis serial and part numbers;
MAC address; power supply status; LCD status; and power status for the
active console.
P Power on/off host
subsystem Powers the host subsystem on or off.
R Reset host
subsystem Resets the host subsystem with a hardware reset.
Important: F5
®
does not recommend using this option under normal
circumstances. It does not allow for graceful shutdown of the system.
N Configure AOM
network Runs the AOM network configuration utility. This utility enables you to
reconfigure the IP address, netmask, and default gateway used by AOM.
If you use this option while connected using SSH, your session will be
disconnected as a part of the network configuration operation.
Note: This option is not available when you are connected using SSH.
S Configure SSH
Server Sets a session idle timeout (in seconds) for the AOM SSH server.
Available values are 0 (no timeout; default value), or between 30 and
86400 (one day).
A Reset AOM Resets the AOM subsystem. In this case, the system is reset with a
hardware reset.
Important: F5
®
does not recommend using this option under normal
circumstances. It does not allow for graceful shutdown of the system.
Q Quit menu and
return to console Exits the AOM Command Menu and returns to terminal emulation mode.
Accessing the AOM Command Menu from the serial console
You can access the AOM Command Menu after connecting to the front panel serial console.
1. Connect to the system using the serial console.
2. Open the AOM Command Menu.
Esc (
Configuring the AOM management network
You can assign a management IP address, netmask, and gateway to access AOM either manually or with
DHCP.
1. Connect to the system using the serial console.
Platform Guide: i5000/i7000/i10000/i11000 Series
23