F5 ARX-VE, Руководство по планированию

Страница: 50 / 64

Chapter 1
Site Planning
1 - 44
ARX-2500 System Power Requirements
The ARX-2500 is powered by two power supplies (1+1 redundancy)
consisting of two power modules and one power system frame. Two power
modules are recommended for full redundancy and load-sharing. The power
supplies require a 10A / 220VAC input cord, which is provided with the
chassis. The AC outlet to the switch must be properly grounded.
ARX-4000 System Power Requirements
The ARX-4000 chassis dissipates 975 watts of power. The control plane
dissipates 600 watts and the data plane dissipates 375 watts. This is
equivalent to 3328 BTUs/hour.
Cable Requirements
This section contains the cable requirements for all the ARX models.
Choose from the following:
• ARX-500 Cable Requirements , on page 1-44
• ARX-1500 Cable Requirement , on page 1-45
• ARX-2000 Cable Requirements , on page 1-46
• ARX-4000 Cable Requirements , on page 1-47
ARX-500 Cable Requirements
The following table lists the required cables and power cords for the
ARX-500. All cables
except the AC power cord and console cable are
customer-supplied.
Table 1.10 ARX-500 Required Power and Data Cables
Qty. Cable/Cord Used on... Specification
1 AC power cord AC/DC Power Supply You can choose from the two cables
shipped with the switch:
• 20 A/250 Vac or
• 15 A/120 Vac
Both have IEC-320 type connectors.
For sites in Europe and Great Britain, we
ship a power cord that is compatible with
local standards.