F.u.n.k.e. F10185, Руководство по установке и эксплуатации

Страница: 8 / 81

FSG 90 System
1 Safety Information
2
FAV_D10024 December 2014
1 Safety Information
Every radio, when transmitting, radiates energy into the atmosphere
that may, under certain conditions, cause the generation of sparks. All
users of our radios should be aware of the following warning:
Do not operate this radio in an explosive atmosphere (petroleum
fuels, solvents, dust, etc.)!
During normal use, the radio will subject you to radio energy
substantially below the level where any kind of harm is reported.
TO ENSURE
PERSONAL SAFETY,
please observe the following simple rules
:

DO NOT transmit when the antenna is very close to, or touching,
exposed parts of the body, especially the face and eyes.

DO NOT transmit on a busy channel.

DO NOT press the transmit (PTT) key when not actually desiring
to transmit.

DO NOT transmit in closed aircraft or vehicles with the antenna
inside the cabin. This may cause malfunction of the avionics or
trigger the airbag! Always operate the radio
FSG 90(X)
with a
suitable outside / external antenna! Assure appropriate lightning
protection where elevated outdoor antennas are used.

DO NOT operate the radio whilst driving. Notice that the use of a
hand held microphone while driving could constitute an offence
under the Road Traffic Regulations in certain countries.

DO NOT allow children to play with any radio equipment
containing a transmitter.

DO NOT
call radio’s SET-UP in flight or whilst driving a vehicle.
Transmit and receive are partially disabled!

After each SET-UP check all settings of the radio and cockpit
instruments for correct function before the next flight or application!

Always turn OFF the radio first (to turn OFF the radio rotate the
ON/OFF-VOL
knob fully counterclockwise to the dot position).
- before switching on or switching off the power source
- before installing the unit into vehicles, aircraft or carrier cases or
when removing from it!
- before starting an engine or vehicle!

When operating the
FSG 90(X)
on a 24/28 Vdc source use a
suitable Voltage Converter 24 Vdc/12 Vdc of at least 5 Amps!

Use the
FSG 90(X)
exclusively for communication on the airband
frequencies.