F.u.n.k.e. F10185, Руководство по установке и эксплуатации

Страница: 50 / 81

FSG 90 System
5 SET-UP Procedure
44
FAV_D10024 December 2014
5.4.6 Selecting '25 kHz only' or combined 8.33/25 kHz channel spacing
IMPORTANT!

Selecting either 8.33/25 kHz or '25 kHz only' may be necessary due
to National Regulations.
The display shows flashing in the upper line »SET« ,
in the lower line either »25« or »8.33« .
By rotating the
F/CH
knob select the required channel spacing:
»25« = '25 kHz only' channel spacing
»8.33« = combined 8.33 and 25 kHz channel spacing.
IMPORTANT!

Confirm the new channel spacing by pushing the
STO
button! The
selected channel spacing becomes active and simultaneously SET-UP
procedure will automatically closed down.
The radio returns to the last used operating mode and the settings
confirmed with the
STO
button became effective.

If you want to carry on with the SET-UP procedure call again SET-UP.
Push once or repeatedly the
MD
button till the required menu appears.
5.4.7 Deleting occupied channel memories
IMPORTANT!

Only channel memory numbers from 5

99 can be deleted. Channel
memories 1 to 4 can only be overwritten.

On an occupied channel memory the channel memory number is
displayed in the upper line, the associated frequency/channel name in
the lower line.

On a free channel memory the channel memory number is displayed in
the upper line, the lower line shows
»FREE« .
EXAMPLE:
The display shows in the upper line alternately »CLR 05« and
»CH 05« and in the lower line the associated frequency.
EXAMPLE: Channel memory number »39« (with the channel
name 132.765) should be deleted.
By rotating the
F/CH
knob adjust the channel memory number »39«
at the display.
If this channel memory should really be deleted, confirm by pushing
the
STO
button. In the lower line the frequency/channel name
disappears, it appears »FREE« .