F.u.n.k.e. 800ATC-H-260-260, Эксплуатация и установка

Страница: 34 / 52

TRT800H / P/N 800ATC-H-(26x)-(26x)
Operation and Installation
33
Document-No: 03.2126.010.71e / Revision: 1.00
Code Description
08 No maximum airspeed data available.
09 Maximum airspeed ≤ 75 kt
10 75 kt > maximum airspeed ≤ 150 kt
11 150 kt > maximum airspeed
≤
300 kt
12 300 kt > maximum airspeed ≤ 600 kt
13 600 kt > maximum airspeed ≤ 1200 kt
14 Maximum airspeed > 1200 kt
15 Not assigned
4.4 Optional settings
4.4.1 Option Ground-Switch
If a ground switch is connected (and enabled in setup) the transponder is
able to determine on-ground and in-flight state. On-ground state is
activated automatically once the gear touches the ground. On-ground
state is indicated on display by symbol 'G' (apart from ‘F’ for In-flight-
state).
In On-ground-state, the transponder will reply differently to certain
addressed interrogations. Also, the transmission rate of some
periodically sent data (squitters, ADS-B) is reduced. This allows ATC to
distinguish between airborne aircraft and those on the ground and it
reduces the Mode S channel load.
For small aircraft, authorities normally do not require such a ground
switch. In this case, the transponder will use the same data formats on
the ground as in the airborne state.
Setup
→
4.5.4 Wiring
→
3.7.3