F-SECURE POLICY MANAGER 7.0 -, Руководство администратора, Страница: 159 / 241

159
10. If you backed up only the Policy Domain Structure (Policy Data and
Domain Structure Backup), restore it as follows:
11. Close all F-Secure Policy Manager Console management sessions
and stop F-Secure Policy Manager Server service.
12. Delete the contents of the <communication directory> \fsa\domains
directory.
13. Copy the backed up data to the same directory as above.
14. Restart F-Secure Policy Manager Server service.
15. Reopen all F-Secure Policy Manager Console management
sessions.
16. Distribute policies.
7.3 Replicating Software Using Image Files
F-Secure Anti-Virus may be included when software is replicated using
disk image files. Every product installation does, however, contain a
unique identification code (Unique ID) that is used by F-Secure Policy
Manager. Several computers may attempt to use the same Unique ID if
disk image software is used to install new computers. This situation will
prevent F-Secure Policy Manager from functioning properly.
Please follow these steps to make sure that each computer uses a
personalized Unique ID even if disk imaging software has been used.
1. Install the system and all the software that should be in the image file,
including F-Secure Anti-Virus. Configure F-Secure Anti-Virus to use
the correct F-Secure Policy Manager Server. However, do
not import
the host to F-Secure Policy Manager Console if the host has sent an
autoregistration request to the F-Secure Policy Manager Server. Only
hosts to where the image file will be installed should be imported.
2. Run the fsmautil resetuid command from the command prompt. This
utility is typically located in the C:\Program Files\F-Secure\Common
directory (the directory may be different if you are using a localized
version of Windows or if you have specified a non-default installation
path).
3. Shut down the computer. Do not restart the computer at this stage.