![background image](http://html1.mh-extra.com/html/f-f-group/pe-180-1400-e-plus/pe-180-1400-e-plus_original-instructions-manual_3098718009.webp)
OpERATION
wARNING: Observe correct main voltage!
The voltage of the power source must agree
with the voltage specified on the nameplate
of the machine.
SwITCHING ON AND OFF
To lock the trigger, hold the lock button in while
pulling the trigger. Release the trigger.
To unlock the trigger, pull the trigger and release.
The lock button will pop out.
NOTE:
Check grinding tools before using. The
grinding tool must be mounted properly and be
able to move freely. Carry out a test run for at least
one minute with no load. Do not use damaged,
out-of-centre or vibrating grinding tools. Damaged
grinding tools can burst and cause injuries.
ADjUSTING vARIABLE SpEED
The operator can adjust variable speed by turning
the speed adjustment dial.
ASSEMBLY
wARNING: Before any work on the machine it
-
self, keep the main plug out of supply.
INSTALLING AUXILIARY HANDLE
1. Put the auxiliary handle on the head.
2. Put the screws into the each side hole.
3. Tighten the screws by using the hex wrench.
INSTALLING pOLISHER pAD
1. Press the spindle lock button.
2. Put the polisher pad into the output spindle.
3.
Turn it to the right direction until it's tight
-
ened
MAINTENANCE AND CLEANING
f
Before any work on the machine itself, pull the
mains plug.
f
For safe and proper working, always keep the
machine and ventilation slots clean.
f
Do not use solvents or cleaning agents to clean the
plastic parts of the tool. A mild detergent on a damp
cloth is recommended. water must never come into
contact with the tool.
f
In extreme conditions, always use dust ex
-
traction as far as possible. Blow out ventilation
slots frequently and install a portable residual
current device (pRCD).
When working metals,
conductive dust can settle in the interior of the
power tool. The total insulation of the power tool
can be impaired.
Please store and handle the accessory(-ies) care-
fully. If the replacement of the supply cord is nec-
essary, this has to be done by FF Group or an au
-
thorized FF Group service agent in order to avoid a
safety hazard.
ENvIRONMENTAL pROTECTION
Recycle raw materials instead of disposing as
waste. Machine, accessories and packaging
should be sorted for environment - friendly
recycling. The plastic components are labeled
for categorized recycling.
GUARANTEE
This product is warranted in accordance with the
legal/country specific regulations, effective from
the date of purchase by the first user. Damage
attributable to normal wear and tear, overload
or improper handling will be excluded from the
guarantee. In case of a claim, please send the ma-
chine, completely assembled, to your dealer or
the service Centre for electric power tools.
English |
9
www.ffgroup-tools.com
PE 180/1400 E PLUS
Содержание PE 180/1400 E PLUS
Страница 3: ...3 www ffgroup tools com PE 180 1400 E PLUS 2 4 9 8 3 5 7 6 1 ...
Страница 38: ...38 PE 180 1400 E PLUS ...
Страница 39: ...39 www ffgroup tools com PE 180 1400 E PLUS ...