F.F. Group HPW 130 EASY, Оригинальное руководство пользователя

Страница: 15 / 76

English | 15
www.ffgroup-tools.com
HPW 130 EASY
f
Avoid high pressure washing in bad weather con-
ditions especially when there is a risk of lightning.
OPERATION
f
The operator must use the unit in accordance with
the regulations. He/she must take local condi -
tions into account and be aware of other people,
especially children, when operating the unit.
f
The unit may only be used by authorized persons
who have received training or have demonstrated
their ability to operate the unit. The unit must not
be operated by children or juveniles (danger of ac-
cidents due to incorrect use of the unit).
f
Never allow children, persons with physical, sen-
sory or mental limitations or a lack of experience
and/or knowledge and/or people unfamiliar with
these instructions to use the machine. Local regu -
lations may restrict the age of the operator.
f
Children should be supervised to ensure that they
do not play with the machine.
f
The unit must never be left unsupervised while
the unit is switched on.
f
The water jet from the high-pressure nozzle pro-
duces a recoil on the gun. You should therefore hold
the gun and spray lance firmly with both hands.
f
Never use a roto nozzle or pencil jet to clean mo-
tor vehicles.
ELECTRICAL SAFETY
WARNING! Switch off, remove plug from mains be -
fore adjusting, cleaning or if cable is cut, damaged
or entangled.
Your machine is double insulated for safety and
requires no earth connection. The operating volt -
age is 230 V AC, 50 Hz (for non-EU countries 220 V,
240 V as applicable). For increased electrical safety
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it. The supply cables must
be inspected for signs of damage at regular inter-
vals and may only be used if in perfect condition.
If the replacement of the supply cord is necessary,
this has to be done by an authorized service agent
in order to avoid a safety hazard.
Only use approved extension cables.
WARNING! Inadequate extension cables can be
dangerous. Extension cable, plug and socket must
be of watertight construction and intended for out-
door use.
Extension cords, cables, leads, reels should only
be used if they comply with EN 61242/IEC 61242
or IEC 60884-2-7. If you want to use an extension
cable when operating your product, only the fol-
lowing cable dimensions should be used:
Nominal Conductor Area of 1,5mm 2 to a max. cable
length of 20m for a Cord Extension Set.
The connections (plugs and sockets) should be kept
dry and off the ground. It is recommended that this
is accomplished by means of a cord reel which keeps
the socket at least 60 mm above the ground.
Note: If an extension cable is used it must be
earthed and connected through the plug to the
earth cable of your supply network in accordance
with prescribed safety regulations. Refer to the in -
struction manual of the extension cord, lead, reel
manufacturer and your local wiring regulations.
MAINTENANCE
f
Switch off the unit prior to all cleaning and main -
tenance work and before replacing components.
Pull out the mains plug if the unit is mains-oper-
ated.
f
Repairs may only be carried out by authorized
FF Φ GROUP Service Centers.
ACCESSORIES AND SPARE PARTS
f
Accessories and spare parts which have been ap-
proved by FF GROUP must be used. Original acces -
sories and spare parts guarantee that the unit can
be operated safety and without any breakdowns.
INTENDED USE
The product is intended for cleaning areas and ob-
jects outside the house, tools, vehicles and boats,
if the appropriate accessories and cleaning agents
approved by FF GROUP are used. Intended use is
related to operation within 0°C and 40°C ambient
temperature. This product should not be used for
professional use.
TECHNICAL DATA
Article number 43 414
Model HPW 130 EASY
Rated voltage
V 220-240
Hz 50
Rated power input W 1800
Protection Class II
Degree of protection IPX5
Pump Material Aluminum
Max Pressure bar 130
Rated Pressure bar 100
Rated Flow l/h 402
Auto Stop System √
Weight kg 8,8
Sound emission values determined according to
EN 60335-1, EN 60335-2, EN 62233
Typically the A-weighted noise levels of the product are:
Sound pressure level dB(A) 88
Sound power level dB(A) 92
Uncertainty K dB 3
Vibration total values a
h
(triax vector sum)
and uncertainty K determined according to EN
60335-1, EN 60335-2, EN 62233
Vibration level max:
a
h
m/s
2
1,8
K m/s
2
0,05
IDENTIFICATION
1. Handle
2. Power cord hook
3. Switch ON/OFF
4. Power cord
5. Water outlet