![background image](http://html2.mh-extra.com/html/f-f-group/css-12v-plus/css-12v-plus_original-instructions-manual_3085056005.webp)
English | 5
www.ffgroup-tools.com
SERVICE
f
Have your power tool serviced by a qualified re
-
pair person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTIONS FOR CORDLESS SABRE SAW
f
Avoid damage that can be caused by screws, nails an
-
other elements in your workpiece; remove them be
-
fore you start working.
f
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the charger.
f
Switch off the power tool immediately when the tool
insert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
the power tool is subject to overload or
it becomes wedged in the workpiece
f
Use only accessories with an allowable speed matching
at least the highest no-load speed of the tool.
f
The tool/charger is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or in
-
struction concerning use of the tool/charger by a per
-
son responsible for their safety.
f
Ensure that children do not play with the tool/charger.
f
Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
f
Secure the workpiece (a workpiece clamped with
clamping devices or in a vice is held more securely than
by hand).
f
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
or fastener may contact hidden wiring or its own cord
(cutting accessory and fasteners contacting a “live”
wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock).
f
Use suitable detectors to find hidden utility lines or call
the local utility company for assistance (contact with
electric lines can lead to fire or electrical shock; damag
-
ing a gas line can result in an explosion; penetrating a
water pipe will cause property damage or an electrical
shock).
f
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
f
Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful (con-
tact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator
or bystanders); wear a dust mask and work with a dust
extraction device when connectable.
f
Certain kinds of dust are classified as carcinogenic (such
as oak and beech dust) especially in conjunction with
additives for wood conditioning; wear a dust mask and
work with a dust extraction device when connectable.
INSTRUCTIONS FOR CHARGERS AND BAT-
TERIES
1.
BATTERY CHARGERS
a.
Before charging, read the instructions.
b. For indoor use. Do not expose to rain.
c. Do not charge non-rechargeable batteries.
2.
BATTERY
a.
The battery must be removed from the appliance
before it is scrapped.
b. The appliance must be disconnected from the sup-
ply mains when removing the battery.
c. The battery is to be disposed of safely.
d. Do not use non-rechargeable batteries.
e. Do not crush, open or burn the battery. Exposure
to potentially harmful materials may occur.
f.
In case of fire use C0
2
dry chemical extinguisher.
g. Do not expose to high temperatures >45°C. Cells
may degrade at high temperatures.
h. The battery must be charged by a constant current,
constant voltage transformer.
i. Charge battery regularly in conditions between 5°C
to 45°C with the specified charger designed for this
battery.
j. Store in a dry, well ventilated area within the rec
-
ommended limits of 10°C to 30°C.
k. Do not use battery if it has been stored at 5°C or
less. Allow it to "normalise" at room temperature
before usage/changing.
l.
During decommissioning remove the battery cell
for recycling separately to the product, which is
covered by the waste electrical and electronic
equipment directive. Insulate the terminals with
adhesive insulating tape to prevent a short circuit,
fire or explosion occurring.
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the ma-
chine's rating plate are compatible with the power sup-
ply you intend to connect it to. This appliance is Class
II* and is designed for connection to a power supply
matching that detailed on the rating label and compati-
ble with the plug fitted. If an extension lead is required,
use an approved and compatible lead rated for this
appliance. Follow all the instruction supplied with the
extension lead.
*Double insulated
: This product requires no earth
connection as supplementary insulation is applied to
the basic insulation to protect against electric shock
in the event of failure of the basic insulation.
LITHIUM-ION MATERIAL DATA SHEET
As a substance under normal conditions of use it is not
considered a hazard to health. In the event of acciden
-
tal release, measures to prevent spread must be ad
-
hered. Do not contaminate rivers, waterways or drains.
Composition of lithium-manganese, lithium-cobalt and
lithium salt as the organic solvent electrolyte (nonaque
-
ous liquid).
Hazardous Decomposition: None during normal op
-
erating conditions. If cell is ruptured hydrogen fluo
-
ride and carbon monoxide may be released.
PRODUCT SPECIFICATIONS
INTENDED USE
This reciprocating saw is designed to cut wood, plastic
and metal, including sheet materials, branches/logs
and window surrounds. It is intended for domestic and
light commercial use only. Any other application is con-
sidered misuse.
Содержание CSS 12V PLUS
