![background image](http://html.mh-extra.com/html/f-f-group/ccs-165-bl-20v-plus/ccs-165-bl-20v-plus_original-instructions-manual_535060014.webp)
| English
14
CCS 165-BL 20V PLUS
tion and damage to the ears. Prolonged exposure
to vibrations can cause injuries and neurovascular
disorders (also called “Raynaud’s syndrome” or
“white hand”), especially to people suffering from
circulation disorders. The symptoms can regard the
hands, wrists and fingers and are shown through loss
of sensitivity, torpor, itching, pain and discoloring of
or structural changes to the skin. These effects can
be worsened by low ambient temperatures and/or
by gripping the handgrips excessively tightly. If the
symptoms occur, the length of time the machine is
used must be reduced and a doctor consulted.
WORKING AREA HAZARDS
Thoroughly inspect the whole work area and use
a rake or yard brush to manually loosen debris and
remove anything that could be a hazardous source
to you or cause damage to the machine. Keep work
area clean and tidy. Do not operate the machine in
wet environment conditions or when the machine
itself is wet. Keep the machine away from flammable
material. Check that there are no bystanders, animal
or items that could be damaged within the machine’s
range of action.
Operate only in well ventilated areas. Wood chips
and saw dust can be a health hazard when inhaled or
when in contact with the eyes. Always wear appro
-
priate half-mask respirator and protective goggles,
when working with such materials and use a dust ex
-
traction device. If devices are provided for the con
-
nection of dust extraction and collection facilities,
ensure these are connected and properly used.
Work only in daylight, or with suitable artificial light,
in good visibility conditions. Try not to cause any noi
-
se disturbance, by only using this machine at reaso
-
nable times of the day.
Take on a firm and well-balanced position. Where
possible, avoid working on wet, slippery ground or in
any case on uneven or steep ground that does not
guarantee stability for the operator.
Storing of tools that are not in use should be done in
a dry and safe place away from the operating machi
-
ne and out of the reach of children.
REMAINING HAZARDS
The machine was built using modern technology
and in accordance with recognized safety rules.
Even when all safety measures are in place, some
remaining hazards, which are not yet evident, may
be present. The operator should use common sense
and take necessary precautions to avoid risk due to
remaining hazards.
PRODUCT SPECIFICATIONS
INTENDED USE
This machine is designed and manufactured for ma
-
chining work pieces by performing straight and mi
-
ter cuts in wood while in firm contact with the wor
-
kpiece. It is not designed for heavy commercial use.
Any other use differing from the above-mentioned
ones could be hazardous, harm people and/or dama
-
ge things and the machine itself.
IMPROPER USE
The machine must not be used for machining ha
-
zardous materials, e.g. accumulation of inflam
-
mable or explosive products and any other object
that could be dangerous to the machine itself as
well as the operator, bystanders, animals or pro
-
perty.
Other examples of improper use may include, but
are not limited, to operation of the machine:
f
Without the original accessories supplied by the
manufacturer.
f
With original accessories but in a way not in accor
-
dance to the instructions.
f
Without original spare parts.
f
With unauthorized modifications.
According to the applicable product liability laws,
the manufacturer of the device does not assume
liability for damages to the product or damages
caused by the product that occurs due to:
f
Improper handling no complied with the opera
-
ting instructions.
f
Repairs by third parties and not by authorized ser
-
vice technicians.
f
Installation of non-original spare parts.
f
Non-intended use.
f
Electrical system breakdown due to power of the
equipment in a manner not compliant with the
electric and VDE regulations.
f
Electrical system breakdown due to use of battery
or charger not approved by the manufacturer.
TECHNICAL DATA
Article Number
46 513
Model
CCS 165-BL 20V
PLUS
Rated
voltage (DC)
V
20
No load speed
rpm
0 - 4.200
Blade
diameter
mm
165
Net weight (without bat
-
tery)
kg
2,8
Max. cutting depth
90⁰
mm
52
45⁰
mm
37
Sound emission values
Typically the A-weighted noise levels
of the product are:
Sound pressure level (LpA)
dB(A)
76
Sound power level (LwA)
dB(A)
87
Uncertainty (K)
dB
3
Содержание CCS 165-BL 20V PLUS
