English | 11
www.ffgroup-tools.com
MAINTENANCE AND CLEANING
WARNING
For your own safety, turn the switch off and re
-
move plug from power source outlet before any
operation of maintenance on the machine.
Keep your appliance clean. In order to avoid over
-
heating of the motor, regularly check the air open
-
ings for any dust sticking on. After a longer period
of use, it is recommended to have the machine
checked by an authorized dealer service. Connec
-
tions and repairs of electrical equipment may only
be carried out by an electrician.
POWER CORD
To avoid shock or fire hazard, if the power cord is
worm or cut, or damaged in any way, have it re
-
place immediately. Electrical connection cables
often suffer insulation damage. Possible causes
are:
f
Punch points when connection cables are run
through window or door gaps.
f
Kinks resulting from incorrect attachment or lay
-
ing of the connection cable.
f
Cuts resulting from running over the connecting
cable.
f
Insulation damage resulting from forcefully pull
-
ing out of the wall socket.
f
Cracks through aging of insulation.
f
Such defective electrical connection cables must
not be used as the insulation damage makes them
extremely hazardous.
CLEANING
Use a small soft brush to clean the outside of the
unit. Do not use strong detergents. Household
cleaners that contain aromatic oils such as pine
and lemon and solvents such as kerosene can
damage plastic housing or handle. Wipe off any
moisture with a soft cloth. Remove dust, dirt and
machining residues with an appropriate vacuum
cleaner if necessary.
STORAGE
WARNING
Turn the switch off and remove the machine from
its power source to store it. Store the machine
only in dry and well ventilated areas.
In case the machine will be stored for an extended
time, use the following storage procedure:
1. Thoroughly clean it and inspect for any loose
or damaged parts. Repair or replace damaged
parts and tighten loose screws, nuts or bolts.
2. Lubricate and apply grease, where required.
3. Store it in its original packaging.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing as
waste. Machine, accessories and packaging should
be sorted for environment friendly recycling. The
plastic components are labeled for categorized
recycling.
This product must not be disposed of together
with domestic waste in compliance with relative
legislation referring to waste of electrical and
electronic equipment. This product must be dis
-
posed of at a designated collection point. This can
occur, for example, by handing it in at an autho
-
rized collecting point for the recycling of waste
electrical and electronic equipment. Improper
handling of waste equipment may have negative
consequences for the environment and human
health due to potentially hazardous substances
that are often contained in electrical and elec-
tronic equipment. By properly disposing of this
product, you are also contributing to the effective
use of natural resources.
You can obtain information on collection points
for waste equipment from your municipal admin
-
istration, public waste disposal authority, an au-
thorized body for the disposal of waste electrical
and electronic equipment or your waste disposal
company.
WARRANTY
This product is warranted in accordance with the
legal / country specific regulations, effective from
the date of purchase by the first user. Damage
attributable to normal wear and tear, overload or
improper handling will be excluded from the war
-
ranty. In case of a claim, please send the product,
completely assembled, to your dealer or the offi
-
cial service center.
POWERCUT 50K
