F+D Feinwerk- und Drucktechnik Plus, Руководство пользователя программного обеспечения, Страница: 32 / 41

32 Software Manual
Plus
ESC-sequences
F+D
Feinwerk- und Drucktechnik GmbH
Kirchenstraße 38, 69239 Neckarsteinach, Germany
Phone: +49 (0) 6229 7000, fax: +49 (0) 6229 70067
E-Mail: info@fuddruck.de, internet: http://www.fuddruck.de
Possible error reasons:
- incorrect ERROR-level
- incorrect specification of number of columns, number of barcode lines
- number of effective data too high
- no D-parameter respectively no effective data
- neither C-parameter, nor R-parameter is defined
- total of data code words + number of correction code words bigger than
925
After this error message no further printout is possible.
Example:
<S
X
>
<E
C
>G020<E
C
>I0020<E
C
>V1
<E
C
>BPDF417;L%10;C3;T0;W2;H8;
D This is a PDF417-Barcode.\013\010
F+D Feinwerk- und Drucktechnik\013\010<C
R
>
<E
T
>
In this case the PDF 417-barcode is additionally defined as a variable barcode field ( #1 ). The
barcode width is defined to 3 code columns (= 3*17 + 69 = 120 modules). Each module has a width of
2 dots --> barcode width = 120 * 2 =240 dots.
The program calculates the single code words and adds 10% of the total number of code words for
correction purposes. Thus, the number of barcode lines is determined. The height of each barcode
line is determined to 8 dots.
Variable barcode field:
To print an additional card with new PDF-data, the following variable control set can for example be
transferred to the printer:
<E
C
>v1; New PDF417-data.\013\010 <C
R
>
<E
C
>#1<C
R
>
Only the PDF-data have been changed. The card layout is kept.
By input of the variable control set:
<E
C
>v1;<C
R
>
no PDF-symbol would be printed.