F+D Feinwerk- und Drucktechnik Plus, Руководство пользователя программного обеспечения

Страница: 13 / 41

Software Manual
Plus
13
ESC-sequences
F+D
Feinwerk- und Drucktechnik GmbH
Kirchenstraße 38, 69239 Neckarsteinach, Germany
Phone: +49 (0) 6229 7000, fax: +49 (0) 6229 70067
E-Mail: info@fuddruck.de, internet: http://www.fuddruck.de
Character Spacing 1
Character Spacing 2
Character Spacing 3
C h a r a c t e r S p a c i n g 4
C h a r a c t e r S p a c i n g 5
Example:
<STX>
<ESC>G50<ESC>I50<ESC>F1<ESC>TARIAL14f;Character Spacing 1
<ESC>G50<ESC>I100<ESC>F2<ESC>TARIAL14f;Character Spacing 2
<ESC>G50<ESC>I150<ESC>F3<ESC>TARIAL14f;Character Spacing 3
<ESC>G50<ESC>I200<ESC>F4<ESC>TARIAL14f;Character Spacing 4
<ESC>G50<ESC>I250<ESC>F5<ESC>TARIAL14f;Character Spacing 5
<EOT>
1.3.5 Positioning
The positioning of objects is realized by defining the X- and Y-coordinates. Without any further
specifications this defined coordinate dot is related to the upper left corner of the corresponding text-,
barcode- or logo-object. By defining additional parameters, the middle as well as right respectively
lower edge can be defined as reference point. Thus, it is possible to centre all objects of a card layout
not only in X- and Y-direction but also to align them to both edges. When positioning, the minimum
distance of 3 mm to the lower edge is to observe.
1.3.5.1 X-Coordinate
Object sequence: < ESC > G d.. [ ; x - Alignment ] [<CR>] (X - Coordinate)
d = 1 ... 672 Number of dots from left edge
x - Alignment = l left
r right
z centred
Example: <ESC>G10;z
OBJECT
I..;r
I..;z
I..
I..;l
G..
G..;l
G..;z
G..;r