Rigging a 1998 Ezzy Power Wave
1998 Ezzy
Power Wave
Rigging &
Fine Tuning Guide
RIGGING:
1) Open the footbatten protector, then insert and tension the foot
batten.
Quick Tip:
You can leave your foot batten in the sail after the first rigging.
2) Slide the mast through the luff sleeve.
Note: do not slide
the mast through the cam, it should go above the cam.
3) Attach the mast extension and cleat off the downhaul
without tensioning.
Quick Tip:
It is easier to attach your boom onto the mast with no
downhaul tension.
4) Attach the boom and outhaul the sail to the boom length (
printed on the sail). At this stage of rigging, the sail should
be outhauled flat in the boom area.
Quick Tip:
The suggested boom length is measured from the
Page 1
