8
Adding a User
(
Note:
Setting up the first user page 7 must be done first)
Command:
Add user +??XXXXXXXX
(see
Country Code page 7)
If the user is already in the list, the system responds with:
Sorry +??XXXXXXXX is already active and cannot be added twice, please check
the number and try again
If the number does not fit the checks, to confirm it is a valid number (all digits must be
numbers excluding the l), the system responds with:
+??XXXXXXXX does not appear to be a valid number, please check that there
are no letters or symbols in the number and try again
If the number does not lead with a +, the system responds with:
??XXXXXXXX does not appear to have the country code in international format
(e.g. +??...) please check this and try again
However if everything is fine, the system responds with:
The user number
+??XXXXXXXX has been added to the user list
Removing a User
Command:
Remove user +??XXXXXXXX
(see
Country Code page 7)
If you try to remove the only user, the system responds with:
Cannot delete the only user.
If the number sent is not currently on the list, the system responds with:
+??XXXXXXXX is not currently in the user list so cannot be removed, please
check the number and try again
If everything is ok, the system responds with:
The user number
+??XXXXXXXX has been removed from the user list
Adding a Administrator
Command:
Add admin +??XXXXXXXX
(see
Country Code page 7)
The system responds with:
The ??XXXXXXXXXXX has been set as the system administrator
If the admin has already been set, the system responds with:
The administrator ??XXXXXXXXXXX has already been set
If an administrator number is set then this is the only number the system will accept
commands from. Other user will be sent texts but CAN NOT send any commands.
Commands
Ezy Switch SMS-IRR-4 Installation & Operation
