8
BATTERY INSTALLATION and REPLACEMENT
1� Install Battery
Tear off the battery insulation, put the battery into the baseplate and insert it to the end.
2� Replace Battery
Remove the battery from baseplate and replace battery with the Lithium Battery CR14250 purchased by a regular manufacturer.
Test the device for correct operation whenever the baterries are replaced after re-fitting the device onto the base plate. If the
device is not working properly, please add the device and configurate the network again by following the steps in Setup part or
directly contact our technical support.
•
Risk of explosion if the battery is replaced by an incorrect type.
•
Improper replacement of the battery with an incorrect type may defeat a safeguard(for example, in the case of some lithium battery types).
•
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
•
Do not leave the battery in an extremely high temperature surrounding environment or extremely low air pressure, which may result in an explosion or the
leakage of flammable liquid or gas.
•
Dispose of used batteries according to the instructions.
•
identifies the battery holder itself and identifies the positioning of the cell(s) inside the battery holder.
•
"+" identifies the positive terminal(s) of device which is used with, or generates direct current, "-" identifies the negative terminal(s) of device which is used
with, or generates direct current.
3� Removable Lithium ion Battery(CR14250)
Component
Material
CAS No�
Contents
Positive electrode
Manganese Dioxide
1313-13-9
25-35wt%
Negative electrode
Lithium metal
7439-93-2
2-3.5wt%
Electrolyte
1,2-dimethoxyethane
110-71-4
3-5wt%
organic solvent
-
8-16wt%
Others(Seel or Plastic parts)
Steel
7439-89-6
35-45wt%
Polypropylene
9003-07-0
0.3-10wt%
