10
1. Take out dirty water bucket.
2. Hold the bucket and take out the
cover.
3. Take out the dirt separator.
4. Clean the cover, the dirt separator
and the bucket.
5. Put them back and install the
bucket back to the device, you can
hear 'click' sound.
4� Cleaning the HEPA
1. Take HEPA out from the top of the
dirty water bucket.
2. Clean HEPA with clean water and
then dry it.
3. Dry the HEPA thoroughly and
then install it back into the dirty
water bucket.
• Dry the HEPA thoroughly and then install it back into the dirty water bucket, otherwise the device
performance will be affected.
• It is recommended to replace a new HEPA once every 2~3 months.
5� Cleaning the Rolling Brush
If you want to clean the residual stains on the suction nozzle, please clean it with wet rag. Rinsing it with
water is forbidden.
