4
Name Description
Confirm Key
• Press and hold the Confirm Key for 3s until the LED indicator ring is flashing blue, at this
time the keypad is ready for binding the lock.
• Remove the batteries, press and hold the Confirm Key and install the batteries back. Press
and hold the Confirm Key for 5s until the LED indicator ring is flashing red, all parameters
will be restored to factory settings.
LED
Indicator Ring
Flashing Red:
Verified failed, binding failed or initializing
.
Flashing White: When you press the keypad (except doorbell button).
Flashing Blue: Binding the lock.
Solid Blue: Binding successfully.
Four-color Flashing
:
When you press the doorbell button or verified
successfully.
Anti Prying Key
Don't press anti prying key more than 10s, otherwise the keypad will sound alarm for 1
minute and you will have to dismiss the alarm on the EZVIZ app after you bind the keypad to
the lock.
3� Gateway
There is no gateway and related accessories in some models of the package, please check carefully
.
LED Indicator Ring
Function Key
Speaker
Power Port
RESET Hole
Network Port
Antiskid Mat
Name
Description
Function Key
• Press and hold the button for over 4s, the gateway will enter Wi-Fi configuration mode.
• Press the button once, the gateway will enter device adding mode; press again, the
gateway will exit adding mode.
•
If the gateway sends alarms, press the button to clear alarms.
LED Indicator Ring
White
•
Solid: Working properly and has been connected to the EZVIZ Cloud.
• Slow-flashing: Entered device adding mode.
• Fast-flashing: Configuring network.
Orange
•
Solid: Starting up or upgrading.
•
Slow-flashing: Offline.
•
Fast-flashing: Breakdowns occur or alarms produced.
