Ezviz CS-X5S-16H, Быстрый старт

Страница: 8 / 96

4
Linkage
Link through Monitor
• Make sure that the camera and device are using the same network, wired or wireless.
• The wireless camera in its initial state can be added to the device's Wi-Fi network by the following steps.
Power on all devices before you start.
• Reset the camera if it has been connected to Wi-Fi before.
• The camera and device should be within the distance of up to 10 m (32.8 feet). Stay away from wireless device or
barriers to avoid signal decreasing.
Within 10m (32.8 ft)
1. Go to Camera Management by Menu Camera.
2. When camera is ready to connect Wi-Fi, click
Search.
3. Click "
+
" to add linked camera.
The camera will automatically connect to the device.
LED Indicator Status
LED Indicator
LED Indicator Status
Steady Green Working Properly
Steady Red
Device Exceptions or Alarm
Flashing Red Restore Factory Defaults