Ezviz CS-A1-32W, Быстрый старт

Страница: 11 / 105

5
3
Disabling the Adding Detectors Mode
Single click the setting button to disable the adding detectors mode after all the detectors are added.
The Adding Detectors Mode will be disabled if no operation occured in 3 minutes.
Mounting (Optional)
The device can be mounted on the wall.
• Make sure the wall is strong enough to withstand three times the weight of the device.
• The installation surface should be clean and flat.
1. Place drill template onto the surface you have chosen to mount the device.
2. (For cement wall only) Drill screw holes according to the template and insert three expansion screws.
3. Use three metal screws to fix the device base according to the template.
4. Install the device on the base, and turn it 15° to secure it.
1
2
5. Connect the power cable to the device. If the device was previously connected to the Wi-Fi network, it will
automatically connect to the same Wi-Fi network.