Page 4
1900 0057-M400-Ver. A
08/09/21
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON
EZTRUNK.NET
Customer Service
Any question call
EMAIL US: [email protected]
Call
203-901-0055 / 203-591-9060
7 Day a week 8:30 am EST
66081
1806012
06081
Adjust Bungee Tension
HOW TO USE GUN HOLDER
GUN HOLDER FOLDED
Locked nut
Bottom screw
Velcro Loop
Top screw
Loosen locked nut a little, Pull the bungee to hook the ring
to the screw with right tension to hold the gun. You can
hook Bottom screw or Top screw.
1. Use Drill bit to make the hole on back panel
2. Use 2 blots and 2 washers assemble gun holder to the
EZTRUNK
1. Use the alcohol wipe to clean the Velcro go area on
back panel. Make sure it is dry after applying the Velcro
Loop side on the panel.
2. Make sure it is right location for Velcro Loop side when
gun holder folded.
1. Fold the gun holder up, use Bolt #06081 to fix in place
2. Unclip the bungee
1. Hook the gun on both side holder
2. Clip the ring to the screw
1. Take out the gun
2. Unfold the gun holders
and screw back Bolt
#06081 to same hole.
66081
1806012
Back Panel of EZTRUNK
4
5
6
7
8
9
