Ezon SHT-330XM/EN, Руководство пользователя

Страница: 14 / 19

25 24
SLAVE3
DOOR1 DOOR2
LOCK2
LOCK1
SLAVE2 SLAVE1
JT
A
G
1
BELL_1
UA
R
T
1
J1
Master
SLAVE1
SLAVE1
SLAVE1
Slave3
Slave2
Slave1
Door Phone1
Door Lock1
Door Phone2
Door Lock2
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
▶ ▶ 3 Household units + 2 Door phones (Door locks)
For safety and correct product connection, always install the product as shown in the wiring diagram below;
Wiring
Installation
Chapter
3
To select slave mode for SHT-3305XM (be sure connect to Slave1), perform the following procedure:
1. Remove the J1 shunt on the bottom of SHT03305XM to set to supervisor setting mode.
2. Press the SET button in supervisor mode to select [1. ID SET SLAVE1].
3. Press the + and - buttons to select the [SLAVE1].
4. Press the Interphone button to save and eixt.
To set the connected unit to SLAVE device, be sure set to the SLAVE ID without overlap.
If the SLAVE ID is overlaped, the unit may malfunction.
Note