
eZi-DA66 Installation Manual
Revision 1.2
Page
4
INTRODUCTION
This manual is for EZI-DA66 and eZI-DA66-HD. Thank you for purchasing the EZI-DA66 Home Audio Distribution System. The EZI-DA66 is a full
function distributed audio system, which combines the functions of a preamplifier, a full 6x6 audio matrix, and six 50-watt power amplifiers for
driving speakers in up to six separate zones. EZI-DA66-HD has a serial port to send commands to an HD matrix to allow HDTV source selection in each zone to follow
the selected zone source Additionally, up to three units can be combined to provide full signal switching and amplification to up to 18 different
speaker zones. For best results, please read and understand this manual thoroughly before installation, paying particular attention to the
safety warnings and guidelines. Keep this manual in a safe place for future reference.
PACKAGE CONTENTS
After receiving the product please inventory the contents to ensure you have all the parts listed below. If anything is missing or
damaged, please contact Customer Service for a replacement.
1x EZI-DA66 master controller/amplifier
6x Keypad controllers
1x Keypad hub
1x Infrared remote control
1x Expansion ribbon cable
1x Rack mounting kit
1x AC power cord with South African 3 Pin plug
1x User's manual
AMPLIFIER FRONT PANEL
Power On/Off/ Standby
Press to power the unit ON. Press again to
power the unit OFF. Note when Master
Controller is ON, each zone will remain in
Standby until the zone keypad is activated.
Zone ON/STANDBY LED
LEDs illuminate to indicate the status of each
zone. The LED will glow Blue when in Standby
and will glow White when activated.
Zone PEAK LED
LEDs illuminate to indicate input level of the connected source is
too high. Normal for LED to flash red occasionally. Steady or red
most of the time indicates input level should be reduced.