manualshive.com logo in svg

Ezee-On 1225, Руководство пользователя

"Получите бесплатное руководство по инструкциям по установке для Eagle 1225. Скачайте этот документ на нашем сайте manualshive.com и узнайте все о вашем продукте. Наше руководство поможет вам правильно установить и настроить Eagle 1225 для оптимальной производительности."

Поделиться
Скачать
background image

 

 

EZEE-ON MANUFACTURING 

 
 

Limited Warranty Policy 

 

NORTH AMERICA 

 

Ezee-On Manufacturing’s products are warranted to the original non-commercial purchaser to be free from defects in material and 
workmanship for a minimum period of twelve (12) months from the original date of purchase.  
 
Ezee-On Manufacturing’s obligation under this warranty shall be limited to the repair or exchange, at Ezee-On’s option, free of 
charge to the original purchaser, any part or component that, in our judgment, shows evidence of such defect. Further, that such 
part shall be returned within thirty (30) days from date of failure to Ezee-On Manufacturing, routed through the dealer and 
distributor from whom the equipment was purchased, 

transportation charges prepaid

. 

 
This warranty shall not be interpreted to render Ezee-On Manufacturing liable for injury or damages of any kind or nature to person or 
property. This warranty does not include claims for, or extend to the loss or damage of crops, loss because of delay in seeding/ planting or 
harvesting, or any expense or loss incurred for labor, substitute machinery, rental, transportation expense or for any other reason. 
 
Except as set forth above, Ezee-On Manufacturing shall have no obligation or liability of any kind on account of any of its equipment and 
shall not be liable for special or consequential damages. Ezee-On Manufacturing makes no other warranty, expressed or implied, and, 
specifically, Ezee-On Manufacturing disclaims any implied warranty or merchantability or fitness for a particular purpose. The purchaser is 
solely responsible for determining suitability of Ezee-On equipment purchased. This warranty is subject to any existing conditions of supply, 
which may directly affect our ability to obtain materials or manufacture replacement parts.  
 
Ezee-On reserves the right to make improvements in the design of products and/ or changes in specifications at any time, without incurring 
any obligation to owners of units previously sold. No one other than Ezee-On Manufacturing is authorized to alter, modify or enlarge this 
warranty.  
 
Genuine Ezee-On replacement parts and components will be warranted for 90 days from date of purchase, or the remainder of the original 
equipment warranty period, whichever is longer. 
 
Under no circumstances will this warranty cover any merchandise or components thereof, which, in the opinion of the Company, has been 
subjected to misuse, unauthorized modifications, alteration, an accident or if repairs have been made with parts other than those 
obtainable through Ezee-On Manufacturing. 
 

Commercial Use

: Warranty for commercial, rental or custom use of any Ezee-On product is limited to 90 days, parts and labor. 

 

Twelve Months Warranty: 

All Ezee-On manufactured products are warranted for twelve consecutive months from the date of delivery of the new Ezee-On product to 
the original non-commercial purchaser.  

 

1-12 Months: 100% parts and labor coverage 

 
 

Page 2 

 

Содержание 1225






































































































































Отзывы:

Нет отзывов

Похожие инструкции для 1225

ABB Navigator 550 Manual preview
Navigator 550
Бренд: ABB Страницы: 6
Labnet 25 Operating Instructions preview
25
Бренд: Labnet Страницы: 5
Backyard Discovery Santa Fe Owner'S Manual preview
Santa Fe
Бренд: Backyard Discovery Страницы: 79
Badger Meter ER-10 User Manual preview
ER-10
Бренд: Badger Meter Страницы: 16
Cadman 1500 Operator, Parts, And Installation Manual preview
1500
Бренд: Cadman Страницы: 84
Gardena 13137-20 Quick Start Manual preview
13137-20
Бренд: Gardena Страницы: 8
GARANT SG1 Operation Manual preview
SG1
Бренд: GARANT Страницы: 239
p-light Midi Installation And Instructions For Use preview
Midi
Бренд: p-light Страницы: 36
Radial Engineering HDI Owner'S Manual preview
HDI
Бренд: Radial Engineering Страницы: 16
R&S SMB100B Getting Started preview
SMB100B
Бренд: R&S Страницы: 61
Mobiak DIAS Instruction Manual preview
DIAS
Бренд: Mobiak Страницы: 15
SDE Lighting Sixty Scan Manual preview
Sixty Scan
Бренд: SDE Lighting Страницы: 7
ICON UMIX1010 RACK Manual preview
UMIX1010 RACK
Бренд: ICON Страницы: 24
Yardbird ZEPHYR FLYER Manual preview
ZEPHYR FLYER
Бренд: Yardbird Страницы: 12
BC BATTERY BT-03 Operating Instructions Manual preview
BT-03
Бренд: BC BATTERY Страницы: 16
Dupline Carpark GP 7380 0080 Quick Start Manual preview
Carpark GP 7380 0080
Бренд: Dupline Страницы: 5
Jysk CHRISTIAN Assembly Instructions preview
CHRISTIAN
Бренд: Jysk Страницы: 2
GAME OF BRICKS Nintendo Entertainment System 71374 Instruction Manual preview
Nintendo Entertainment System 71374
Бренд: GAME OF BRICKS Страницы: 63

Бренды по названию

Популярные бренды

Загрузить еще бренды