DISASSEMBLY
Your EZee Life™ mobility scooter has been designed to easily disassemble and transport. You can easily
disassemble the scooter into four pieces, the front section, the rear section, the seat unit and the
battery case (Figure 9).
DISASSEMBLY
• Lift the seat off of the scooter seat post.
• Loosen the battery case safety lock cap (Figure 6.1) and remove battery case from scooter (Figure 6.).
• Remove the front to rear wire harness connection (Figure 10.)
• Lift up on the yellow plastic ring latch until the scooter is sitting on its rear end (Figure 11.)
• With both hands remove the front section of the scooter from the rear section (Figure 12.)
• Loosen the tiller adjustment knob, lower the tiller, and retighten the tiller adjustment knob.
• You can now transport the four sections (front, rear, seat, and battery case).
Figure 9 Figure 10
Figure 11 Figure 12
9
