Ezee Glow Celestial, Руководство пользователя

Страница: 17 / 21

17
LCD Screen
Weekday
Mon, Tues, Wed, Thurs, Fri, Sat, Sun
Note: The functions can
only be adjusted when the
related letters or digits are
flashing.
Note: Calibrate the timer
to current time before
entering the weekly
settings.
Time Display
Current Time / Timer From 00:00 to 24:00
NOTE: 00-12:00 is AM / 13:00-24:00 is PM
TEMPERATURE button: Turns heater on
and off to maintain room at a certain
temperature.
NOTE: Press & Hold the button for 5
seconds, the temperature setting will
switch from
℃
to
℉
. Same way from
℉
to
℃ .
P 1. Press once, Indicator lights up.
Temperature goes to 18 ℃
2. Press again, until desired setting is
reached. Digital display shows setting
circles as below:
1 Set current day and time
1. Press once. When
“MON” (Monday) begins flashing, use
to select the current day.
2. Press . When the hour digits begin flashing, use to select the current hour.
3. Press again. When the minute digits begin flashing, use to select the current minute.
4. Press again. The current time is now set.
2 Set ON/OFF time and temperature on a weekly cycle
1. Press
. When “MON” begins flashing, press
3 times. Whe
n “ON” begins flashing, use
to select
the desired hour and minute to turn on the heater. Press
at any time to clear the digits and shut down
“ON” timer.
2. Press
. When “OFF” begins flashing, use
to select the desired hour and minute to turn off the heater.
Press at any time to clear the digits and shut down
“OFF” timer.
3. Press
again. When “18” begins flashing, use
to select the desired temperature for Monday.
4. Press again. When
“TUES” appears on the screen and “ON” begins flashing, use
to select the desired
hour and minute to turn on the heater for Tuesday.
5. Press
again. When “OFF” begins flashing, use
to select the desired hour and minute to turn off the
heater for Tuesday.
6. Press a
gain. When “18” begins flashing, use
to select the desired temperature for Tuesday.
note:
The timer can only be adjusted in 30-minute intervals (i.e. 00:00 - 00:30; 00:30 - 01:00, etc.)
note:
If the temperature was previously set, those digits will be shown instead of
“18”.