Ezee Glow Celestial, Руководство пользователя

Страница: 15 / 21

15
Control Panel Operation
BUTTON FUNCTION ACTION & INDICATION
ON : Enables control panel functions and
remote control. Turns on flame effect.
OFF : Disables control panel functions and
remote control. Turns off flame effect.
1. Press once , Indicator light turns on.
Power turns on. All functions enabled.
2. Press again , Flame effect turns off.
Power and all functions turn off.
FLAME button : Adjusts flame brightness.
NOTE: Flame effect stays on until power
button is turned off. Flame effect must be
on for heater to turn on.
1. Press once , Indicator light turns on.
Flame brightness changes.
1. Press again, until desired brightness is
selected.
COLOUR button : Adjusts flame colour.
NOTE: Colour effect stays on until power
button is turned off. Colour flame effect
must be on for heater to turn on.
1. Press once , Indicator light turns on.
Flame colour changes.
2. Press again , until desired colour is
selected.
HEATER button : Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE: To prevent overheating, the heater
blows cool air for 10 seconds before the
heater turns on, and after it turns off.
NOTE: Heater overrides room temp
control.
1. Press once , Indicator light turns on.
Fan blows cool air for 10 seconds. Low
heater (H1) turns on and blows warm air.
2. Press again , Indicator light remains on.
High heater (H2) turns on and blows hot
air.
3. Press again, Indicator light turns off.
The fan blows cool air for 10 seconds,
then turns off.
TEMPERATURE button: Turns heater on
and off to maintain room at a certain
temperature.
NOTE: Press & Hold the button for 5
seconds, the temperature setting will
switch from
℃
to
℉
. Same way from
℉
to
℃ .
P 1. Press once, Indicator lights up.
Temperature goes to 18 ℃
2. Press again, until desired setting is
reached. Digital display shows setting
circles as below:
LED Ember light button: Adjusts fuel-bed
colour.
NOTE: Ember color effect stays on until
power button is turned off.
1 . Press once, Ember color changes.
2. Press again, until desired colour is
reached.