EZCOO EZ-MX44HA, Руководство пользователя

Страница: 8 / 11

EZS CAS EN Set Cascade Mode Enable (Turn OFF HDCP)
EZS CAS DIS Set Cascade Mode Disable (Turn ON HDCP)
EZS OUTx VS INy Set Output x To Input y {x=[0~4](0=ALL), y=[1~4]}
EZS OUTx EXA EN Set Ex-Audio Output Enable {x=[0~4](0=ALL)}
EZS OUTx EXA DIS Set Ex-Audio Output Disable {x=[0~4](0=ALL)}
EZS OUTx STREAM ON Set Output x Stream ON {x=[0~4](0=ALL)}
EZS OUTx STREAM OFF Set Output x Stream OFF{x=[0~4](0=ALL)}
EZS INx EDID y Set Input x EDID{x=[0~4](0=ALL), y=[0~32]}
EZS HIP xxx.xxx.xxx.xxx Set Host IP Address to xxx.xxx.xxx.xxx
EZG HIP Get Host IP Address
More details for EDID list and IP setting, please send “EZH” to
get help list.
IP control
Connect the USB or RS232 to PC, using the RS232 interface to send command”
EZG HIP”, you will get the IP address of the matrix.
Make sure your PC and the matrix on the same network.
Typing in the IP address in a browser
Note: please begin with http://
e.g: You get a IP address 192.168.101.20
please typing in
http://
192.168.101.20
And you will see four sections
Sense Switch, select inputs for each output.