EZAutomation EZ Touch EZ7 Series, Быстрый старт

Страница: 17 / 32

16 / 31
P
ORTS AND
W
IRING
Pin
Number
Connection
1 Chassis GND
2 PLC TXD (RS-232C)
3 PLC RXD (RS-232C)
4
+5V (100 Ω )
5 Logic GND
6 LE
7 PLC CTS (RS-232C)
8 PLC RTS (RS-232C)
9 RXD+ (RS-422A)
10 RXD- (RS-422A)
11 TXD+ (RS-422A)
12 TXD- (RS-422A)
13 Terminating Resistor
(connect to pin 9)
14 NC
15 NC
Power: 24 VDC
1 Positive
2 Negative
3 Earth GND
Indicator Light at the backside of the unit
Flashes Red, then continuously Green Power connected, Normal Operation
Blinking Red / Continuously Red Some Panel Issue has occurred. Please try a power cycle, if that does not
fix the issue please contact Tech Support.
No Light Power source not connected or inadequate
15 Pin D-Sub Serial
RS232/422/485 PLC Port
Use it to connect PLCs
serially. EZAutomation
offers cables for most PLCs
9 Pin D-Sub Serial
Programming Port
RJ45-Ethernet
connector Micro SD card
Connector Display Cable
Connector
for
connecting FRONT unit
3-Terminal Power
Connector
USB Type B for
Programming
USB Type A for flash
drives