EZ Air Hawk, Руководство пользователя

Страница: 23 / 31

21
Installing The Battery:
Hold the battery handle and insert the other side of the battery into the battery sleeve of the right or
left side then insert the red power plug into the bottom hole of the battery sleeve.
1. Use available standard alternating current (AC 110-220 V, 50-60 Hz) for charging, the charging
port is in front of the joystick above.
2. Make sure that the power is off before charging.
3. Insert the round (xlr) charging plug of the charger into the charging port in front of the joystick.
(shown in figure G1)
4. Insert the other side of the charger into wall socket. If the red indicator is light is on, this indicates
it charging.
5. Once the charger indicator light turns from red to green you have a full charge. Unplug the
external wall plug first, then unplug the (xlr) plug from the joystick.
6. It is forbidden to use the battery in extreme heat or extreme cold.
When the charge on the battery of the Air Hawk Wheelchair has been used or drained, the over
discharge protection will shut the battery off to protect against excessive discharge. Users should
pay attention to, when the over discharge protection device is activated, the maximum speed will be
considerably reduced.
The electric Air Hawk Wheelchair is also equipped with a over-current or (excessive current). If the
Over Discharge Protection
Charging
Over-Current Protection
G1