EZ Air Hawk, Руководство пользователя

Страница: 17 / 31

15
hear a clicking sound (it locks).
2.2 Adjust the plastic safety belt to the appropriate length, do not over tighten which will cause
discomfort.
Unfasten the safety belt:
Press the button of the plastic shell side, pull out the plastic card.
Caution
Before each use, ensure that the safety belt is fixed in the electric Air Hawk Wheelchair correctly
and properly, and adjust to the most comfortable state of the user.
Before each use, check whether the safety belt is loose or damaged. If you find there is a problem,
Please contact supplier to maintain and repair.
The control joystick can be installed on the left or the right arm according to the users requirement.
1. As shown in figure D1, insert the joystick to the armrest tube hole, and make sure it has been
inserted in the right place, and then fixed the joystick by knob lock.
2. As shown in figure of D2, aim at the socket, and insert the four-core plug into the left socket.
The control joystick controls the Air Hawk Wheelchair. It consists of the following sections:
1. Switch on button:
Press this button, turn on and turn off the power of the electric Air Hawk Wheelchair.
2. Speed up button:
Press this button and speed up. The max speed is 6 km/h (3.75 miles per hour)
3. Slow down button:
Press this button, reduce the speed.
4. Horn button:
Press this button, the horn will sound.
5. Battery power indication light:
Show the life of the charge on the battery.
Joystick installation instruction
D1
D2