7
•
The ELECTRICAL plug-in should be attached to a high quality outdoor waterproof type
outlet. Installed in a safe place so as not to short circuit and should be properly grounded
and installed by a qualified professional electrician. Use wire in conformity of all local,
state, and federal codes. It is best to use a ground-fault protected plug.
MAINTENANCE
•
Check gas and water lines for leaks often.
•
Clean the inlet water line filter.
•
If there has been a smoking condition due to a poor burn, the unit should be cleaned inside
by a professional technician.
•
Keep the cover and heater clean.
•
During high humidity and lower temperatures it is normal for some fogging to occur to the
exhaust.
•
To prevent the build-up of scale inside the heater, it should be flushed at least once per
year. The water inlet should be filtered to lower the hardness and impurities. Soft water
will add to the life of the heater.
