EZ DUPE Media Maven, Руководство пользователя

Страница: 22 / 26

12. HDD Manager
This command is for the management of the hard disk drive (HDD) installed in
the duplicator.
Note : This feature is only available on duplicators with a HDD installed. If there
is no HDD present in the duplicator, this feature will NOT show in the menu of
commands.
12.1 Select Image
Allows the selection of an image presented on the HDD to be used as source.
The
▲▼
scroll buttons cycle through the image(s) on the HDD and the ENT
button confirms the selection while the BACK button cancels the selection.
The image(s) are listed in order of which they were loaded.
Press ▲▼ to
select Image
12.2 Disc => Image
Transfers the information from the source CD/DVD/Blu-ray to the HDD. After
the image(s) transfer is completed, the source disc is ejected and the source
drive is changed to the HDD.
Note : to select source drive, please refer to 8. Source Select .
12.3 Image Information
Displays the image information in order: the file name of the image stored on
the HDD, the type of image stored, and the amount of data the image contains.
ENT
[ HDD Manager ]
2. Disc => Image
Copy x1 702M
0% 0M
Result
Pass 1 Fail 0
ENT
[ HDD Manager ]
1. Select Image
[ IMG_0001.dup ]==>
1. IMG_0001> 702MB
[ IMG_0002.dup ]==>
2. IMG_0002>
IMG_0002.dup : The Image’s name
CD : Disc’s type.
697MB : Total image file capacity
1Trk : The number of image’s track.
ENT
[ HDD Manager ]
3. Image Information
1. [IMG_0001.dup ]
CD 1Trk 702MB
2. [IMG_0002.dup ]
CD 1Trk 697MB
21