8
Roller Adjustment for EZ Port & Stow
The EZ Port & Stow comes from the factory with the rollers in their recommended roller position. For some personal watercraft
(PWC) models, it may be necessary to adjust the rollers on your new EZ Port & Stow. Your EZ Port & Stow can be adjusted to fit
most PWCs. Each roller is adjustable and can be placed in any one of eight positions. The illustrations below show each of the
eight positions. A roller placed too high may cause your PWC to tip to one side. A roller placed too low may cause difficulty in
launching and docking your PWC. Your EZ Port & Stow is designed to make launching and docking fast, fun, and easy. This
process may take several adjustments before getting the correct position for your PWC model.
#1 Position
A. Upper roller tray
B. Axle plate down
C. Spacers below plate
#5 Position
A. Upper roller tray
B. Axle plate down
C. Spacers above plate
#3 Position
A. Upper roller tray
B. Axle plate up
C. Spacers below plate
#7 Position
A. Upper roller tray
B. Axle plate up
C. Spacers above plate
#2 Position
A. Lower roller tray
B. Axle plate down
C. Spacers below plate
#6 Position
A. Lower roller tray
B. Axle plate down
C. Spacers above plate
#4 Position
A. Lower roller tray
B. Axle plate up
C. Spacers below plate
#8 Position
A. Lower roller tray
B. Axle plate up
C. Spacers above plate
