3
IMPORTANT! Assembly, Installation, Maintenance and Safety:
You should read these instructions thoroughly before assembling and installing your EZ Port & Stow. Please adhere to all recom-
mendations and cautionary suggestions appearing in this manual and always follow the instructions precisely. Please save these
instructions and refer to them as needed for future reference.
Tools and Requirements:
As with any assembly and installation, some tools are required to assemble and install your EZ Port & Stow. You may not need
every tool listed below for your particular installation, but the following tools are generally helpful in the installation process (for
professional installation, call your local EZ Dock distributor or dealer):
EZ Dock in-water installation tool (900010)(only needed for EZ Dock mounting)
1/2” drive ratchet
socket set (especially 1/2”, 9/16:, 5/8”, 11/16”,15/16” sq. HD. or 19mm - 12pt)
open-end, boxed-end wrench set (above mentioned sizes)
screwdrivers (Phillips and standard)
pliers
adjustable wrenches
hammer
pry-bar (small and large)
rope (at least 3/8” braided nylon)
power drill and bits
utility knife
EZ Port & Stow Specifications
Length: 184” (4.7 m)
Width: 60” (1.5 m)
Height: 15” (38 cm)
Weight: 520 lbs. (236 kg)
Floatation Capacity: 1450 lbs. (658 kg)
Because of the rotomolding process, weights and dimensions may vary.
