9
7.1 NETWORK SETUP (continued)
Assign IP Address:
If the PA15/ 17/ 19/ 22B1080P is connected to a network without a DHCP
server or you want to use Local FTP Server function, enter the fixed IP address, Mask, Gateway
and DNS for the PA15/ 17/ 19/ 22B1080P.
PS. Refer to 5.1 for how to enter IP address by remote control.
NOTE:
Before setting the IP address, Mask, Gateway and DNS, check the network information of
your PC. Please follow the steps below to get the network information of your PC.
Step 1:
Click on “Start”
→
“Run” and type in “command”, then press “ENTER”.
The MS-DOS window will appear, type in “ipconfig” and then press “ENTER” to get the network
information.
Step 2:
Assign IP Address, Mask (Subnet Mask) and Gateway (Default Gateway) for the PA15/ 17/
19/ 22B1080P.
Enter the same values of the Subnet Mask and Gateway, and be careful not to enter the values of
IP address that are already used by other devices on the network.
Media Player 11 Server:
Enable/ disable the Media Player 11 server.
10
7.2 FTP SETUP
Local FTP Server:
Turn on/ off the PA15/ 17/ 19/ 22B1080P server.
(If you use the PA15/ 17/ 19/ 22B1080P server, please disable the DHCP function and input a
fixed IP address, Mask, Gateway and DNS of the PA15/ 17/ 19/ 22B1080P)
Local FTP Server Setup:
Set the “Port”, “User ID” and “Password” of the PA15/ 17/ 19/
22B1080P
(The Default Port: 21, User ID: root, Password: admin)
FTP Auto Download:
Enable/ Disable the FTP auto download function.
Remote FTP Download Setup
- Server IP:
Enter the domain name or IP address of the FTP as was given to you by
your
Web hosting provider.
- Port:
The default port for FTP is 21. In most cases you should not change this number.
If the FTP site uses a port other than 21, you should enter the correct port.
- User ID:
Enter the user name of the Remote FTP server.
- Password:
Enter the Password of the Remote FTP server.
- FTP Path:
Enter the folder path that you want to share.
NTP Server:
Enable/ Disable the NTP server function. (if the PA15/ 17/ 19/ 22B1080P isn’t
connect to internet, please disable the NTP Server function)
Time Setup:
Set the
NTP Server
,
Local Time
and
Auto Download Time
here.
①
NTP Server
(the PA15/ 17/ 19/ 22B1080P must be already connected to the network)
-
NTP Server: Enter the NTP server IP address like: 204.152.184.72.
-
G.M.T: After PA15/ 17/ 19/ 22B1080P get the time from NTP server, it will update the
G.M.T field.
-
Time Zone: Use the
,
-
and
Numeric Key
to set the time zone of your location.
(time zone must be set properly for the
Auto-Download
and
Schedule
functions)
