Eyevis openWARP2, Руководство пользователя

Страница: 7 / 33

s
Afety
i
nstruCtions
In this chapter you will find general instructions for the safe handling of
this product.
► Read this safety information thoroughly and follow all the
instructions carefully.
In the following chapters, warning signs displayed in colour also indicate
hazards that are imminent.
Intended use
The openWARP² is intended for visually replaying contents for industrial
use.
•
Only operate the product in a horizontal position.
•
Only use the product in dry rooms.
•
Observe the permissible environmental conditions (see Technical
Specifications on page 31.)
Operator qualifications
Installation and preliminary adjustments should only be performed by
qualified service personnel or authorised service dealers.
General information
►
Carefully observe all warnings on the system parts and in this user's
manual.
►
Carefully follow all the instructions governing the operation and use
of our systems.
►
Observe all the local system installation and operation regulations
which our systems are subject to.
Power
► Only use the power cable supplied by eyevis.
►
The power cable must be correctly and securely connected to earthed
power outlets.
►
Do not connect multiple devices to the same power outlet.
► Do not touch the power plug with wet hands when removing or
plugging the plug into the outlet.
► Do not forcefully bend or pull the power plug and do not place any
heavy material on it.
► Do not disconnect the power cable while using the product.
►
To disconnect the device from the mains in an emergency, the plug
must be pulled out from the mains socket. The mains plug must
therefore be easily accessible at all times.
► Do not overload outlets and cables above their permissible capacity.
Do not use impermissible extension cables.
openWARP²(-LC) User Manual 5
sAfety instructions