Eyevis openWARP2, Руководство пользователя

Страница: 14 / 33

DC IN
12 V
EDID
DVI OUT
DVI IN
USB
LED
DC IN
5 V
DVI OUT
DVI IN
USB
Fig. 2: Backside (OW²-LC)
LED LED LED
AN / AUS
PRESET
Fig. 3: Frontside
1
green LED This LED indicates that the device is on and
operating.
2
green LED This LED indicates that a DVI-D signal at the
entrance.
3
red LED This LED indicates that no output was produced.
This can be given, for example due to excessive
distortion.
4 Preset-Button Start without using the stored setting.
The settings for warping, color correction, and shading can be
permanently stored on the device. After rebooting the machine, the
saved settings are applied. If you have not saved the settings made in,
after a reboot the software will use, the last used configuration. To start
the unit without the saved configuration hold the button PRESET when
you turning on the device. It must be kept pressed until the picture is
already complete. After that procedure you receive a device default
configuration
4
4
3
3
2
2
1
1
12 openWARP²(-LC) User Manual
Product overview