Adjusting automatically assigned IDs
In some cases the automatic ID assignment have to be adjusted manually, e.g.
if the layout of the automatically assigned IDs do not match the logical layout
required by the control software. This can be achieved by manually adjusting
the Display ID in the OSD.
To adjust the ID in the OSD menu:
1.
Enter the section
Setup
of the OSD.
2.
Adjust the
Device ID
.
3.
To activate the newly assigned ID close the OSD.
To adjust the ID by selecting the device in eyeDeviceSetup:
1.
Open the
User
tab.
2.
Enter a new device ID in the
Device ID
field in the
ID Settings
section.
3.
Press
Apply ID
to activate the newly assigned ID.
To adjust the ID via terminal:
1.
Open a terminal.
2.
Sent the command (see following example).
ª
The new ID will be assigned immediately.
Example for changing the display ID 1 to ID 5:
►
Set(1;Force Display;5)
Resetting Display IDs
In some cases it may be required to reset all IDs to 1. You can perform the
resetting via terminal or the eyeDeviceSetup software.
To reset via terminal:
►
Reset all display IDs to 1 by sending SET(0;Reset Display ID;1) to the wall.
To reset via eyeDeviceSetup software:
►
Trigger
Reset Display ID
in the section
ID Settings
in the
User
tab.
EYE-LCD-4200/4700-24LE
78
User Manual
Содержание LCD-4200
Страница 1: ...User Manual Version 1 2 May 2015 Technical changes reserved eyeLCD 4200 4700 24LE EYEVIS LCD LINE...
Страница 68: ...Appendix Dimensions EYE LCD 4200 24LE EYE LCD 4200 4700 24LE 68 User Manual...
Страница 69: ...Appendix Dimensions EYE LCD 4700 24LE EYE LCD 4200 4700 24LE 69 Version 1 2 May 2015...