background image

ACHTUNG

Dieses Gerät ist ein Produkt der Klasse A gemäß EN 55022: 2010. In 

Wohnräumen kann dieses Gerät Störsignale erzeugen, die durch 

entsprechende Abhilfemaßnahmen durch den Benutzer beseitigt werden 

müssen.

ACHTUNG

Verwenden Sie EMV-gerechte, abgeschirmte Kabel, um die folgenden 

Anschlüsse zu verbinden: 

PC/AV DVI-D-Ausgangsanschluss, PC/AV DVI-D-Eingangsanschluss, PC/AV 

HDMI-Eingangsanschluss, PC D-sub-Eingangsanschluss, PCRGB-

Eingangsanschlüsse und RS-232C-Eingangs-/Ausgangsanschlüsse. 

 WARNUNG

Wenn ein Monitor nicht auf einer stabilen Unterlage aufgestellt wird, 

besteht die Gefahr, dass er kippt oder fällt. Zahlreiche Verletzungen, 

besonders bei Kindern, können durch einfache Vorsichtsmaßnahmen 

vermieden werden:

 

Bei Verwendung der vom Hersteller empfohlenen 

Befestigungsvorrichtungen, wie z.B. Wandhaken.

 

Stellen Sie den Monitor nur auf Möbelstücke, die ausreichend stark sind.

 

Achten Sie darauf, dass der Monitor nicht über den Rand des Möbelstücks, 

auf dem er steht, vorsteht.

 

Stellen Sie den Monitor niemals auf ein großes Möbelstück (z.B. einen 

Schrank oder in ein Bücherregal), ohne sowohl das

 

Möbelstück als auch den Monitor an einem geeigneten Element sicher zu 

verankern.

 

Stellen Sie den Monitor niemals auf ein Tuch oder andere Materialen, die 

zwischen dem Monitor und dem Möbelstück, auf dem er steht, liegen.

 

Weisen Sie Kinder eindringlich darauf hin, dass es gefährlich ist, auf ein 

Möbelstück zu klettern, um an den Monitor oder seine Regler zu gelangen.

 WARNUNG

Wichtige Hinweise für die Sicherheit von Kindern

 

Lassen Sie Kinder niemals auf den Monitor klettern oder am Monitor 

spielen.

 

Stellen Sie den Monitor nicht auf Möbelstücke, die leicht als Stufen 

verwendet werden könnten, wie zum Beispiel eine Truhe oder Kommode.

 

Bedenken Sie, dass Kinder bei Betrachtung eines Fernsehprogramms – und 

ganz besonders bei einem “überlebensgroßen”

 

Monitor – in starke Aufregung verfallen können. Der Monitor sollte so 

aufgestellt werden, dass er nicht umgestoßen oder gekippt werden kann.

 

Alle am Monitor angeschlossenen Kabel und Stränge sollten so verlegt 

werden, dass neugierige Kinder nicht daran ziehen oder sie ergreifen 

können.

EYE-LCD-5500-XSN-LD-FX

16

 User Manual

Содержание EYE-LCD-5500-XSN-LD-F























































































Отзывы: