EyeView Gpower-S3PIR, Руководство по установке оборудования

Страница: 12 / 27

2.3 Indoor H/W Installation Procedures
2.3.1 Indoor installation
1. Installing the camera:
Take out the camera upper casing, as shown below:
Wall mount
Pandent mount
2. Wiring
After completion of the above works, connect the wires for video /
DC15 V Power Input/ LAN/WAN.
3. Electrification test
z Before connecting the power, make a final check to confirm correct
wiring.
z After electrification, the camera will undertake an automatic
self-test. This routine consists of vertical scanning following by
horizontal scanning
.
Then the camera automatically swings to
Position 1. This concludes the initialization of self-test.
4. Install the dome cover
Finishing all the above, the transparent dome cover can be installed.
Make sure the screws are driven tightly.
2-10