IR Speed Dome Installation Manual
Chapter 1 Installation and Settings
The following installation instructions are applicable to Hikvision IR speed domes, network IR speed
domes and network high-definition IR speed domes. Wall mounting is chosen as an example in this
chapter. Please refer to Chapter 3 for different types of mountings.
Note:
Before installation, please make sure that the device in the package is in good condition and
all the assembly parts are complete.
Before you start:
1. For cement walls, expansion screws are needed for dome mounting. For wooden walls, you
need to mount the base with self-tapping screws. Please make sure that the wall is sturdy
enough to withstand more than 3 times of the weight of the dome and the bracket. If not, the
dome may fall and cause serious damage.
2. Please keep the wrappers after unpack the product. In case of any failure occurred, please
return the speed dome to the dealer with the original wrapper.
Note:
Transportation without the original wrapper may result in damage to the speed dome and
extra cost.
1.1 Installation
Steps:
1. Position the mount to the wall and fasten the lock screws to secure it.
Figure1. 1 Wall Mount
2. Screw the fast-mounting adapter to the wall mount and tighten it. Fasten the set screw to
reinforce as shown in Figure 1.2
8
www.eyesoniccctv.com