Page 19
IP CAMERA USER MANUAL
You could set alarm time for alarm in some time of special day, such as holiday.
1. Select a date at the "Date" pull down list, press "Add" button to add that date to the list box
on the right side and then move the scroll bar to set the schedule of that day.
2. Select a date in the list box on the right side, and press "Erase" to remove the schedule on
that day.
Press the "Save" button to save the settings.
Note: Holiday schedule is prior to Week schedule.
5.4
Network Configuration
Network configuration includes eight submenus: Port, Wired, Server Configuration, IP Notify,
DDNS Config, RTSP, UPNP, Mail Setting and FTP.
5.4.1
Port
1. Go to "Network config"
"Port" to see the interface as shown below.
2. Input port number for IE access in the "HTTP Port" textbox.
3. Input the port number for audio & video transmission in the "Data Port" textbox.
5.4.2
Wired
1. Go to "Network Configuration"
"Wired" to see a tab shown below.
2. There are two options for IP setup: obtain an IP address auto by DHCP protocol and use the
