eyeLock NanoFace, Руководство пользователя системы

Страница: 33 / 38

eyelock.com NanoFace™ from eyeLock User Guide, v1.0.6
sales@eyelock.com January 2022
Copyright 2022, all rights reserved support@eyelock.com
Page 33 of 38
Name Description
Mask alarm Selects the type of action that the device should take when
no mask is detected (
Not used , Warning message ,
Access deny )
Face image log Selects whether to show face image on event log
Date/Time Time settings Configures device date and time
Door Relay Selects whether to use relay
Open duration Configures time duration for door open relay
Use exit Selects a GPI port number connected to exit door button
(
Not used , GPI Port 1 , GPI Port 2 , GPI Port 3 )
Exit type Selects contact state of the GPI port that exit door button
uses (
NC , NO )
Use alarm Selects a GPI port number connected to alarm sensor ( Not
used , GPI Port 1 , GPI Port 2 , GPI Port 3 )
Alarm type Selects contact state of the GPI port that alarm sensor uses
(
NC , NO )
Use sensor Selects a GPI port number connected to sensor ( Not used ,
GPI Port 1 , GPI Port 2 , GPI Port 3 )
Sensor type Selects contact state of the GPI port that sensor uses ( NC ,
NO )
Held open duration Types acceptable door held open period
Tamper Mode Selects a tamper protection mode ( Not used, Beep mode,
Secure mode )
If you select Secure mode, all the data and settings are deleted
permanently in device when physical tampering is detected / attempted.
Device info Device name Configures the device name
Model Shows the model’s name
FW version Shows the device firmware version
APP version Shows the application version
MAC Shows the MAC address