7-4 Cleaning spray nozzle
Take care of tip of needle.
The tip of needle is very sharp. Be careful not
to injure or not to bend or break down it when
you drop. Also, if you leave it sticking out and
hit it, the tip will bend and break, so please
work with care.
Caution
1) Please remove the silicon tube and air piping from
the spray nozzle.
*When removing the air piping tube, pull out the tube
while pushing the rim of the connector.
2) Pull out the spray nozzle upward from the main unit
3) Disassemble the spray nozzle and wash respective
parts in an ultrasonic cleaner etc.
*Disassemble with reference to "Spray Nozzle
Disassembly Diagram on page 34."
*Clean the inside wall of the inside tube, the gas
cap, and the liquid cap especially carefully.
*The inner wall of the inside tube should be
washed with running water using a thin brush etc.
*Replace gasket and O ring on a regular basis.
Remove
Remove
Spray nozzle
Silicon tube
Air piping
Spray nozzle
Pull out
-33-
①
Push the rim
②
Pull out tube
