3
＝＝
Notice
＝＝
When you require to perform continuous operation of 24 hours/day under temp. of less than
0deg
℃
for more than one week duration.
Please contact us.
We will propose customized version of the chiller for such cases.
Product name
Low temperature circulator (Cool Ace
）
Model
CA-1116A
S
P
E
C
.
Range of ambient
temperature
5
～
40
℃
( Indoor use only)
※
5
Range of ambient
humidity
20
～
80% ( Indoor use only )
Dimensions
※
6
（
main unit
）
354(W)
×
384(D)
×
851(H)
（
excluding nozzle
）
Dimension of the bath
280 (Diameter)
×
270 (Depth)
Supply voltage
AC 220V
±
10%
50/60Hz
Supply power
※
7
4.3A 950 VA
Weight
Approx. 43 kg
Operation presser max.
2.45 MPa
Pollution degree
2
Over voltage category
Ⅱ
Operation at a
terrestrial altitude
Max 2000m above sea level
※
1
・
Heater is not equipped.
・
Temperature control not available when the ambient temperature is low, unloaded and high
temperature setting.
※
2 Condition
・
Room temperature 20
℃
・
Water 14
ℓ
・
Circulation flow Max.
・
Setting
5
～
30
℃
・
Heat load Less than 90% of cooling capability
（
displayed capability
）
・
Power source
AC 220V 50Hz
・
In some cases the accuracy differs depending on room temperature, supply power, type of
refrigerant, the condition of stirring in the bath and etc.
※
3 Condition
・
Room temperature 20
℃
・
Circulation volume Max.
・
Supply power: AC 220V 50Hz
・
Cooling capability is
±
10
％
of displayed capability.
・
Cooling capability differs depending on room temperature, supply power, voltage,
type of refrigerant, condition of stirring in the bath and etc.
※
4
Condition
・
Water temperature
20
℃
・
Supply power / voltage
AC 220V 50Hz
・
Circulation capability is
±
10
％
of displayed capability.
・
Circulation capability differs depending on the type of secondary refrigerant.
※
5
In order to guarantee the performance of the instrument described in this manual
ambient temperature must be within the range from 5 to 35
℃
.
※
6
External dimension does not include protrusion.
※
7
When voltage is dipped during operation, the unit may indicate “ A14 ” may be on the
control panel and then quit operation. However, this is not a fault of the unit.
