EYE TECH CARE EyeOP1 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 45

EYE TECH CARE EyeOP1 Скачать руководство пользователя страница 41

User Manual MUT_RD_009H_GB Page

41

of 43

7. SECTION 7: ERRORS AND WARRANTY

7.1

Warranty

The EyeOP1 Control Unit must be checked and revised once a year by qualified personnel appointed by the
manufacturer.

EYE TECH CARE cannot be held responsible for safety, reliability and incorrect operations under
the following conditions:

1.

When installation, improvements, adjustments, modifications, preventive or
corrective maintenance actions have not been carried out by authorized and
qualified personnel appointed by EYE TECH CARE.

2.

If the room where the device is installed does not comply with electrical
specifications and recommendations.

3.

When the medical device is not being used in compliance with instructions and
recommendations described in the present manual, or given by qualified personnel.

4.

When parts or accessories have been replaced with parts or accessories non-
qualified or non-authorized by EYE TECH CARE.

7.2

Management of interruptions in the treatment sequence

The firing sequence automatically stops at treatment completion. However, in some cases, the sequence can
be prematurely discontinued either on purpose (in case of emergency) or inadvertently

(firing pedal release),

or due to an error (e.g. suction problem). In any event, a completely or partially treated sector must not be
retreated. The following diagram illustrates the management of sequence interruptions. The user only has to
follow this procedure on the screen of the Control Unit.

Manual

redetection

No

Cancellation

Yes

Yes

No

Yes

No

No

Yes

Defective suction ?

End of treatment:

Report display

Awaiting start by firing pedal

Execution of firing sequence

Process stop

Sequence over ?

Request to user:

Definitive stop requested ?

❷

Vaccum test

Cone & probe positioning

❶

Request to user:

Manually redetect probe ?

Probe check "OK"

«
...
39
40
41
42
43
...
»

Содержание EyeOP1














































Отзывы:

Нет отзывов